Others
o
Do
not insert objects other than the memory card
into the card slot.
o
Do not block the vent on the unit.
Blocking of the vent causes internal heating and
may lead to burns and fires.
0
Do not turn off the [POWER ON/OFF] switch
or remove the power cable during recording
or playback.
0
The camera recorder may not show stable
pictures for a few seconds immediately after
the power is turned on, but this is not a
malfunction.
0
When
the video signal output terminals are not
in use, put on the covers to prevent damage
to the terminals.
o
Do not drop this unit or subject it to strong impact
or vibration as it is a precision equipment.
o
Optical performance of lens
Due to the optical performance of the lens, color
divergence phenomena (magnification
chromatic aberration) may occur at the
periphery of the image. This is not a camera
malfunction.
o
Noise may appear in the image when switching
modes.
o
If placed on its side, heat release efficiency will
deteriorate.
o
Use the supplied AC adapter as the power
supply. Do not use the supplied AC adapter on
other devices.
o
When the connectors that come with connector
covers are not in use, put on the covers to
prevent damage to the connectors.
o
This camera recorder makes use of fonts by
Fontworks Inc.
o
This camera recorder makes use of M+FONTS.
Precautions for Proper Use
17
Introduction
To Next Page
Loading...
Need help?
General
