JVC GY-HM660E - Page 120

Rec Mode
0
For selecting the record mode for recording to
the SD card.
(A P
80 [Special Recording] )
0
The selectable options vary according to the
[Record Format
] menu settings.
Format
No. of Frames for
Frame & Bit Rate
Setting values
MP4
(MPEG2)
QuickTime
(MPEG2)
MXF
(MPEG2)
a
MP4
(MPEG2)
QuickTime
(MPEG2)
b
30p, 25p, 24p Normal, Pre
Rec, Clip
Continuous,
Interval Rec,
Frame Rec,
Variable Frame
60p, 60i, 50p, 50i Normal, Pre
Rec, Clip
Continuous,
Interval Rec,
Frame Rec
AVCHD 60p, 60i, 50p, 50i Normal, Pre
Rec, Clip
Continuous,
Interval Rec,
Frame Rec
QuickTime
(H.264)
60p, 60i, 50p, 50i Normal, Pre
Rec, Clip
Continuous,
Interval Rec,
Frame Rec
30p, 25p, 24p Normal, Pre
Rec, Clip
Continuous,
Interval Rec,
Frame Rec,
Variable Frame
Memo :
0
When [Slot
Mode] is set to “Backup”, this item is
fixed at “Normal”.
0
[Variable Frame Rate
] is enabled when
[WResolution]/[YResolution] is set to
“1920x1080” or “1280x720”, and [WFrame & Bit
Rate]/[YFrame & Bit Rate] is set to “30p”, “25p”
or “24p”.
9
Pre Rec Time
For setting the pre-recording time when
[Rec
Mode] is set to “Pre Rec”.
[Setting Values: R5sec, 10sec, 15sec]
Memo :
0
When the frame rate setting in [Main Menu] B
[System] B [Record Set] B [Record Format] B
[Frame & Bit Rate] is set to “XHQ”, “15sec”
cannot be selected.
9
Rec Frames
For setting the number of frames to record when
[Rec Mode] is set to “Frame Rec” or “Interval Rec”.
[Setting Values: R1frame, 3frames, 6frames]
9
Rec Interval
For setting the recording time interval when [Rec
Mode] is set to
“Interval Rec”.
[Setting Values: R1sec, 2sec, 5sec, 10sec, 30sec,
1min, 2min, 5min, 10min, 30min, 1hour]
9
Variable Frame Rate
For setting the frame rate during recording when
[Rec Mode] is set to
“Variable Frame”.
The available options vary according to the settings
for [Record Format] B [WResolution]/
[YResolution] and [WFrame & Bit Rate]/[YFrame
& Bit Rate].
(A P84 [Variable Frame Rec] )
Slot Mode
For setting the operation of the card slot.
0
Series:
Mode that activates the two slots sequentially.
0
Dual:
Mode that activates the two slots at the same
time.
(A P76
[Dual Rec] )
0
Backup:
Mode that enables recording to slot B without
using the [REC] button. This item is selectable
only when [Rec Mode] is set to “Normal”.
Start or stop the recording using the [Backup
Rec] menu or press the [USER1] to [USER7],
[LCD KEY▲], [LCD KEY▶], [LCD KEY▼], [LCD
KEY◀] button that is assigned with “Backup
Trig”.
(A P78
[Backup Rec] )
120
Menu Display and Detailed Settings