EasyManua.ls Logo

JVC GY-HM750U - Video Format Settings Details; Input Source Selection; SDI Return and Input Signal Settings; Frame Rate and Format Settings

JVC GY-HM750U
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
VIDEOFORMATMenuScreen
Settingsinboldarefactorydefaultsettings.
Item SettingValue Description
PEAKINGFREQ. LOW
MIDDLE
HIGH
Thisitemsetsthefrequencybandwherethecontourisemphasizedwiththe
[PEAKING]control.
LOW :Emphasizesthelowfrequencyband.
MIDDLE :Emphasizestheintermediatefrequencyband.
HIGH :Emphasizesthehighfrequencyband.
Memo
ThisitemisdisabledwhentheFocusAssistisactivated.
PAGEBACK ^ Thisreturnstothe[MAINMENU]screen.
Item SettingValue Description
INPUTSOURCE VF
SDI
SelecttheinputimagetodisplayontheLCDscreen.
VF :Inputstheimagefromthecamerasviewfinder.
SDI :Inputstheimagefromthisviewfinder’s[SDIINPUT]terminal.
SDIRETURN
OFF
ON
Thisitemsetswhethertousethesignalsinputtothisviewfinder’s[SDIINPUT]
terminalasreturnsignals.
OFF : Returnsignalsaresuppliedbythecamera.Doesnotusethesignalsinputtothe
[SDIINPUT]terminal.
ON : Usesthesignalsinputtothe[SDIINPUT]terminalasthereturnsignals.
Memo
When[INPUTSOURCE]issettoSDIB,thisitemappearsas----Bandcannot
beselected.
INPUTSIGNAL AUTO
MANUAL
Selectwhethertoautomaticallydetectthevideoformatoftheinputsignals.
AUTO :Automaticallydetectsthevideoformat.
MANUAL :Thevideoformatisnotautomaticallydetected;selectthevideoformat
using[FRAMERATE]or[FORMAT].
Memo
Whenthereturnvideoisinput,setthisitemtoAUTOB.
FRAMERATE 60
50
Thisitemsetstheframerateoftheinputsignals.
60:Selectthiswhentheframerateoftheinputsignalsis60Hz.
50:Selectthiswhentheframerateoftheinputsignalsis50Hz.
Memo
When[INPUTSIGNAL]issettoAUTOB,thisitemappearsas----Bandcannot
beselected.
FORMAT Selecttheformatoftheinputsignals.
1080I :SelectthiswhentheinputsignalisHD1080i.
720P :SelectthiswhentheinputsignalisHD720p.
480I :SelectthiswhentheinputsignalisSD480i.
576I :SelectthiswhentheinputsignalisSD576i.
Memo
When[INPUTSIGNAL]issettoAUTOB,thisitemappearsas----Bandcannot
beselected.
If[SystemDefinition]oftheGY-HM790seriesissettoSD(DV)Bwhen
[INPUTSOURCE]issettoVFB,select1080IB.
Whenthisitemissetto720PBwhilethe[INPUTSOURCE]issettoVFB,the
returnvideosuppliedbythecameraisnotdisplayed.
480IBor576IBcanonlybeselectedwhen[INPUTSOURCE]issettoSDIB.
WhenFRAME
RATEissetto
60
1080I
720P
480I
WhenFRAME
RATEissetto
50
1080I
720P
576I
ASPECT[SD] 4:3
16:9
ThisitemsetstheaspectofthescreendisplaywhenSDsignalsareinput.
ThisitemisenabledonlywhenSDIsignalsareinputtothe[SDIINPUT]terminal
while[INPUTSOURCE]inthe[VIDEOFORMAT]menuissettoSDIB.
4:3 :Displays4:3inputsignalsas-is.
16:9 :Displays4:3imagesin16:9.Thisisvalidwhentheinputsignalsareat
SQUEEZE.
PAGEBACK ^ Thisreturnstothe[MAINMENU]screen.

Other manuals for JVC GY-HM750U

Related product manuals