Reducing Camera Shake
When DIS is turned on, camera shake during recording can be effectively
reduced.
●
The setting of DIS switches with every touch.
Display Setting
X
(Image stabilizer
1)
Activates image stabilizer.
Y
(Image stabilizer
2)
Reduces camera shake more effectively
when shooting bright scenes on the wide an-
gle end.
*Only on the wide angle end (approx. 5x)
Z
(OFF)
Deactivates image stabilizer.
Memo:
●
It is recommended to switch off this mode when using a tripod and re-
cording a subject with little movement.
●
Complete stabilization may not be possible if camera shake is exces-
sive.
●
This setting is effective for video recording only.
Checking the Captured Image Immediately
You can check the most recently captured images while in the recording
mode. (Quick Review)
Memo:
●
You can also delete the image after checking.
●
Quick Review can no longer recall the most recently captured image
once the power is turned off.
Use the playback mode to check the image in this case.
Still Image
●
"Checking the Captured Image Immediately(Still Image)" （A P.24）
Taking Still Images in Auto Mode
You can record without worrying about the setting details by using the au-
to mode.
1
Open the lens cover.
2
Open the LCD monitor and select the still image mode.
●
The still image mode icon appears.
3
Check if the recording mode is Auto.
●
If the mode is Manual, touch the G/H button.
The mode changes between Auto and Manual with every touch.
4
Set the focus on the subject.
Set the focus on the subject.
●
When focused, the focus icon lights up in green.
5
Take a still image.
●
PHOTO lights up when a still image is being captured.
Recording
22
To Next Page
Loading...
