25
VCR
Recording a TV Programme
Recording with a SCART Lead:
You can record a programme using
the TV receiver of the DVD/VCR and at
the same time watch another pro-
gramme on the TV set using its re-
ceiver. As the DVD/VCR automatically
switches the TV set the following
points should be observed:
Auto Rewind Feature
The DVD/VCR will automatically rewind
when the tape has ended (except during
ITR and TIMER REC). It will also eject
the cassette tape.
Press TV/VCR until "VCR" appears on the display. Select
the program on the DVD/VCR you
want to record. This
program
can be watched on the screen and recorded by the
DVD/VCR.
1
While the VCR is recording press TV/VCR until the "VCR"
indicator on the display goes off. The TV set now displays
the program of its built-in receiving module. Select the TV
channel you want to watch on the TV set. Although the TV
set now shows another program the DVD/VCR will con-
tinue recording the previously selected programme.
2
Using TV/VCR you can switch the TV screen between the
DVD/VCR picture and the TV picture. If the "VCR" indicator
is lit on the display, you will watch
the DVD/VCR picture. This
has no
trouble on the recording.
3
To Display VCR operation Status
Press OSD. The clock, day of the week and more informa-
tions will be indicated.
To cancel the indicating: Press OSD until all indicator
disappear.
REC
REC
VCR
“VCR” indicator goes on.
“VCR” indicator goes off.
“VCR” indicator goes on.
CH 80
23:59 MON
01:36:58 SP
STEREO
HI-FI
Audio Select
Deck-status
here: Playback
Time
Stand of Tape counter
Day of the week
Indication for
Hi-Fi-playback
or stereo-
reception
Tape speed
Cassette in
Unit
Programme
number or
Scart input
(AV1,AV2 or
AV3)
2A77501B E(24-29) 5/30/02, 9:22 PM25
To Next Page
Loading...
