10
Adjusting the Volume
You can adjust the volume level only while the unit is turned
on. The volume level can be adjusted in 32 steps (VOLUME
MIN, VOLUME 1 – VOLUME 30, and VOLUME MAX).
The volume level control does not affect recording.
Turn VOLUME + / – clockwise (+)
to increase the volume or
counterclockwise (–) to decrease it.
When using the remote control, press
VOLUME + to increase the volume or
VOLUME – to decrease it.
• When adjusting the volume, the back color
on the display changes as increasing/
decreasing the level—not lighting ↔ blue
↔ purple ↔ pink ↔ red.
To turn off the volume level temporarily
On the remote control ONLY:
Press FADE MUTING.
The volume level gradually decreases to
“VOLUME MIN.”
To restore the sound, press the button again.
To listen with headphones
Connect a pair of headphones to the PHONES jack on the
unit. The sound will no longer come out of the speakers.
Disconnecting a pair of headphones from the PHONES
jack activates the speakers again.
• DO NOT set the volume to a high level before
connecting or putting on headphones.
•
DO NOT turn off (standby) the unit with the volume
set to an extremely high level; otherwise, a sudden
blast of sound can damage your hearing, speakers
and/or headphones when you turn on the unit or
start playing any source next time.
REMEMBER, you cannot adjust the volume level
while the unit is off (standby).
Continued
• When you unplug the AC power cord or if a power failure
occurs
The clock loses its setting and is reset to “0:00.” If this happens,
set the clock again.
• The clock may gain or loss 1 to 2 minutes per month
If this happens, reset the clock.
Selecting the Sources
Press one of the source buttons—FM/AM, CD 3¥8,
TAPE 2 3, and AUX.
When you press one of the source buttons (FM/AM,
CD 3/8, TAPE 2 3, and AUX), the unit turns on and starts
playing the source if it is ready.
• To listen to the FM/AM broadcasts, press FM/AM.
(See page 13.)
• To play back discs, press CD 3¥8. (See pages 16 – 22.)
• To play back tapes, press TAPE 2 3. (See page 23.)
•
To select an external component as the source, press AUX.
BEEP
ON/OFF
FADE
MUTING
VOLUME
BEEP
ON/OFF
FADE
MUTING
VOLUME
09-13.CA-HXZ10[A&B]f 03.3.18, 10:44 AM10
To Next Page
Loading...
Need help?
General
