JVC KD-BT11 - Selecting a Preset Sound Mode

ENGLISH
18
3 Select a tone.
4 Adjust the sound elements of the selected
tone.
1 Adjust the frequency.
2 Adjust the level.
Selecting a preset sound mode
You can select a preset sound mode suitable to the music genre (iEQ: intelligent equalizer).
Preset value setting for each sound mode
Sound
mode
Preset value
BASS (bass) MID (mid-range) TRE (treble) LOUD
(loudness)
Freq. Level Q Freq. Level Q Freq. Level Q
USER 60 Hz 00 Q1.25 1.0 kHz 00 Q1.25 10.0 kHz 00 Fix
OFF
ROCK 100 Hz +03 Q1.0 1.0 kHz 00 Q1.25 10.0 kHz +02 Fix
CLASSIC 80 Hz +01 Q1.25 1.0 kHz 00 Q1.25 10.0 kHz +03 Fix
POPS 100 Hz +02 Q1.25 1.0 kHz +01 Q1.25 10.0 kHz +02 Fix
HIP HOP 60 Hz +04 Q1.0 1.0 kHz –02 Q1.0 10.0 kHz +01 Fix
JAZZ 80 Hz +03 Q1.25 1.0 kHz 00 Q1.25 10.0 kHz +03 Fix
Freq.: Frequency Q: Quality slope
Storing your own sound mode
You can adjust the sound modes and store your own
adjustments in memory.
• The adjustment you make will be stored for the
currently selected sound mode (iEQ) including
“USER.”
1 Select a sound mode.
2 Enter the adjustment mode.
This mode will be canceled if no operations are
done for about 5 seconds.
EN16-21_KD-BT11_001A_f.indd 18EN16-21_KD-BT11_001A_f.indd 18 12/7/07 3:32:58 PM12/7/07 3:32:58 PM