JVC KD-G635 - Sound and General Settings; Adjusting Sound Characteristics; General Settings (PSM)

12
ENGLISH
Adjusting the sound
You can adjust the sound characteristics to your
preference.
1
2
Indication, [Range]
BAS*
2
(bass), [–06 to +06]
Adjust the bass.
MID*
2
(mid-range), [–06 to +06]
Adjust the mid-range frequencies sound level.
TRE*
2
(treble), [–06 to +06]
Adjust the treble.
FAD*
3
(fader), [R06 to F06]
Adjust the front and rear speaker balance.
BAL*
4
(balance), [L06 to R06]
Adjust the left and right speaker balance.
LOUD*
2
(loudness), [LOUD ON or LOUD OFF]
Boost low and high frequencies to produce a well-
balanced sound at low volume level.
SUB.W*
1
(subwoofer), [00 to 08, initial: 04]
Adjust the subwoofer output level.
VOL (volume), [00 to 30 or 50*
5
]
Adjust the volume.
*
1
Displayed only when “L/O MODE” is set to “WOOFER”
(see page 13).
*
2
When you adjust the bass, mid-range, treble, or
loudness, the adjustment you have made is stored
for the currently selected sound mode (iEQ) including
“USER.”
*
3
If you are using a two-speaker system, set the fader
level to “00.”
*
4
This adjustment cannot affect the subwoofer output.
*
5
Depending on the amplifier gain control setting. (See
page 13 for details.)
General settings — PSM
You can change PSM (Preferred Setting Mode) items
listed in the table that follows.
1
2 Select a PSM item.
3 Adjust the PSM item selected.
4 Repeat steps 2 and 3 to adjust other PSM
items if necessary.
5 Finish the procedure.
EN06-13KD-G635[U]_f.indd 12EN06-13KD-G635[U]_f.indd 12 11/7/06 11:58:27 AM11/7/06 11:58:27 AM