JVC KD-G801 User Manual

42
ENGLISH
CD CHANGER OPERATIONS
Playing discs
Select the CD changer (CD-CH).
* If you have changed “EXTERNAL IN” setting to
“LINE IN” (see page 38), you cannot select the CD
changer.
• When the current disc is an MP3 disc:
Playback starts from the first folder of the
current disc once file check is completed.
* When “CLOCK DISP” is set to “CLK DISP ON”
(see page 36), the current indication will soon
change to the clock time.
This section is only for KD-G801.
We recommend that you use the JVC MP3-
compatible CD changer with your unit.
By using this CD changer, you can play back
your original CD-Rs (Recordable) and CD-RWs
(Rewritable) recorded either in audio CD format
or in MP3 format.
• You can also connect other CH-X series CD
changers (except CH-X99 and CH-X100).
However, they are not compatible with MP3
discs, so you cannot play back MP3 discs.
• You cannot use the KD-MK series CD
changers with this unit.
Before operating your CD changer:
• Refer also to the Instructions supplied for
your CD changer.
• If no discs are in the magazine of the CD
changer or the discs are inserted upside
down, “NO DISC” will appear on the display.
If this happens, remove the magazine and
set the discs correctly.
• If no magazine is loaded in the CD changer,
“NO MAG” appears on the display. If this
happens, insert the magazine in the CD
changer.
• If “RESET 1” – “RESET 8” appears on the
display, something is wrong with the
connection between this unit and the CD
changer. If this happens, check the
connection and make sure the cords are
connected firmly. Then, press the reset
button of the CD changer.
Note:
You cannot control and play any WMA disc on the CD
changer.
CD CD-CH*
(folder) indicator
MP3 indicator Selected folder number
Selected disc number*
EN42-46_G801_G701[E_EX]f.p65 1/6/04, 12:09 PM42

JVC KD-G801 Specifications