15
ENGLISH
Playing a CD
1
Open the control panel.
Note on One-Touch Operation:
When a CD is already in the loading slot,
pressing CD/CD-CH turns on the unit and starts
playback automatically.
2
Insert a CD into the loading slot.
The unit turns on,
draws the CD and
starts playback
automatically.
3
Close the control panel by hand.
All tracks will be played repeatedly until you
stop playback.
CD OPERATIONS
Notes:
• When a CD is inserted upside down, the CD
automatically ejects (if the control panel is open).
If the control panel is closed, the source changes to
the previously selected source, “Please Eject”
flashes on the display.
• If there is no CD in the loading slot, you cannot
select CD as the source. “No Disc” flashes on the
display.
Current track and elapsed playing time
Total track number and total
playing time of the inserted disc
The display changes to show the following:
EN15-19KD-LH1150_1100[J]f.p65 1/25/03, 11:17 AM15
To Next Page
Loading...
