39
ENGLISH
5
Select (highlight) one of the listed
items for which you want to
download a file.
• Opening : Opening screen
To download an animation to be shown
after the unit is turned on. (You can store
only one animation consisting of a
maximum of 30 frames.)
• Ending : Ending screen
To download an animation to be shown
before the unit is turned off. (You can store
only one animation consisting of a
maximum of 30 frames.)
• Picture : Graphic screen*
To download a still image to be shown if
no operation is done for about 20
seconds. (You can store 90 still images—
one frame each.)
• Movie : Graphic screen*
To download an animation to be shown if
no operation is done for about 20
seconds. (You can store only one
animation consisting of a maximum of 90
frames.)
* Graphic screen will appear only if the
“Graphics” setting is set to one of the
following—“UserMovie,” “UserSlide,” or
“UserPict.” (see page 48).
If you want to cancel the procedure,
press number button 5, the download
selection screen goes off.
6
Show the name list of the folder
included in the inserted CD-R.
“File Check....” appears for a
while, then the folder list*
appears.
The currently selected folder will be
highlighted on the display.
* You can assign your own names when editing a
CD-R.
Notes:
• On this list, the folders including the target
files—<jml> files for “Picture” and <jma>
files for the others—are shown.
• The display can show only six names at a time.
You can show the other names on the next lists
by pressing 5 (up) or ∞ (down).
• If a disc inserted does not include any <jml>
and <jma> files, beeps sound and you cannot
go to the next step.
If you want to cancel the procedure,
press D DISP.
7
Select (highlight) a folder in which a
file you want is included.
CONTINUED ON THE NEXT PAGE
EN37-44_KD-LH401[E_EX]f.p65 30/1/04, 5:23 PM39
To Next Page
Loading...
Need help?
Audio Amplifier Specifications
