ENGLISH
25
SOUND ADJUSTMENTS
Adjusting the sound
You can adjust the sound characteristics to your preference.
1
Select the item you want to adjust.
Each time you press the button, the adjustable items change as follows:
Indication To do: Range
BAS Adjust the bass. –06 (min.) — +06 (max.)
TRE Adjust the treble. –06 (min.) — +06 (max.)
FADER* Adjust the front and rear speaker R06 (Rear only) — F06 (Front only)
balance.
BALANCE Adjust the left and right speaker L06 (Left only) — R06 (Right only)
balance.
BBE See “What is BBE
II
?” on the next page. BBE OFF, BBE 1, BBE 2, BBE 3
WOOFER Adjust the subwoofer output level. 00 (min.) — 08 (max.)
VOLUME Adjust the volume. 00 (min.) — 50 (max.)
Note:
* If you are using a two-speaker system, set the fader level to “00.”
2
Adjust the level.
Note:
Normally + / – button works as the volume control. So you do not
have to select “VOLUME” to adjust the volume level.
12
Equalization pattern changes as you adjust the bass or treble.
FADER BALANCE
WOOFER
BBE
VOLUME
BAS
(bass)
TRE
(treble)
EN25-29.KD-LX50R[E]/f 00.3.22, 10:35 AM25
To Next Page
Loading...
Need help?
General
