28
ENGLISH
Recalling the sound modes
Select the source while the “Link” indicator is
lit on the display.
The “Link” indicator starts flashing, and the sound mode stored
in memory for the selected source is recalled (and appears
on the display for a while).
Notes:
• You can adjust each sound mode to your preference, and store it in memory.
If you want to adjust and store your original sound mode, see “Storing your own sound adjustments”
on page 29.
• To adjust the bass and treble reinforcement levels or to turn on/off the BBE
II
function temporarily,
see pages 25 and 26. (Your adjustments will be canceled if another source is selected.)
• By setting “CLOCK DISP” to “CLK DISP OFF” (see page 53), you can always show the current
sound mode setting when the unit is turned on.
SOURCE (ATT)
EN25-29.KD-LX50R[E]/f 00.3.22, 10:35 AM28
To Next Page
Loading...
