(No.MA465<Rev.003>)1-23
4.9 ERROR CODE
Mechanical Error Detail Codes
Disc error code
Condition Details Error Code Detail Code
LOADING Error Error without SW change in LOAD when time-out is done
B1 Time Out When there is no change in the state of the switch from the state
with DISC forward.
09 0011
C1 Time Out When there is no change in the state of the switch from the state that
DISC is drawn in a half.
09 0012
B2 Time Out When there is no change in the state of the switch from the state that
DISC is in the interior.
09 0015
EJECT Error Error without SW change in EJECT when time-out is done.
B1 Time Out When there is no change in the state of the switch from the state that
DISC is in the interior.
01 0023
C2 Time Out When there is no change in the state of the switch from the state that
DISC is drawn in a half.
01 0026
B2 Time Out When there is no change in the state of the switch in EJECT from
initial LOAD ERROR.
01 0027
FORCE EJECT Error Transition to Force EJECT waiting or Force EJECT transition from
error Error by abnormal SW.
E1 FORCE EJECT ERROR When detect abnormal SW from the state of NO DISC 01 0041
E2 FORCE EJECT ERROR When detect abnormal SW from the state with DISC forward in
LOAD.
01 0042
E3 FORCE EJECT ERROR When detect abnormal SW from the initial state. 01 0043
E5 FORCE EJECT ERROR When detect abnormal SW from the state that half DISC is drawn in
LOAD and EJECT.
01 0045
E7 FORCE EJECT ERROR When detect abnormal SW from the atate that DISC is in the interior
in LOAD and EJECT.
01 0047
E8 FORCE EJECT ERROR When receive Force EJECT key after it makes an error from Force
EJECT.
01 0048
E9 FORCE EJECT ERROR When receive Force EJECT key after it makes an error from LOAD
error or EJECT error.
01 0049
Error in Running mode
Case 1 When DISC was extracted or fall in EJECT END and EJECT
START.
09 0031
Case 2 When DISC is pushed in EJECT END. 09 0032
Condition Details Error Code Detail Code
TOC READING Error When it hasn't completed CD TOC reading. 84 0059
1'st track access Error It doesn't end even if the first track access passes 30sec after the
TOC reading ends in the running mode.
80 0060
Last track access Error It doesn't end even if the last track access passes 30sec after the
first track ends in the running mode.
80 0061
NODISC judgement It be judged NODISC. 80 0090
NO DISC with start failure Not possible to start. 80 0091
Stopped with no playback When it was stopped in playback in the running mode. 80 0093
Logical format NG Analysis of logical format is impossible or it does not correspond to
logical formats.
80 0094
To Next Page
Loading...
Need help?
General
