ENGLISH
38
Symptoms Remedies/Causes
USB device playback
• Noise is generated. The track played back is not an MP3/WMA track. Skip to
another file. (Do not add the extension code <.mp3> or
<.wma> to non-MP3 or WMA tracks.)
• “READING” keeps flashing on the display. • Readout time varies depending on the USB device.
• Do not use too many hierarchy or folders.
• Turn off the power then on again.
• Do not pull out or connect the USB device repeatedly
while “READING” is displayed on the display.
• “NO FILE” appears on the display. Check whether the selected folder, the connected USB
device, or the iPod/iPhone contains a playable file.
• Tracks/folders are not played back in the
order you have intended.
The playback order is determined by the file name. Folders
with numbers on the initial of their names are sorted in
numerical order. However, folders with no numbers on
the initial of their names are sorted according to the file
system of the USB device.
• “CANNOT PLAY” appears on the display.
• “NO USB” appears on the display.
• The unit cannot detect the USB device.
• Check whether the connected USB device or the iPod is
compatible with this unit.
• The USB device is not connected properly. Connect the
USB device again.
• “NOT SUPPORT” appears on the display
and track skips.
Check whether the track is a playable file format.
• Correct characters are not displayed (e.g.
album name).
This unit can only display alphabets (upper case),
numbers, and a limited number of symbols.
• While playing a track, sound is
sometimes interrupted.
The tracks have not been properly copied into the USB
device.
Copy tracks again into the USB device, and try again.
Bluetooth *
2
• Bluetooth device does not detect the
unit.
The unit can be connected with one Bluetooth cellular
phone and one Bluetooth audio device at a time.
While connecting a device, this unit cannot be detected
from another device. Disconnect currently connected
device and search again.
• The unit does not detect the Bluetooth
device.
• Check the Bluetooth setting of the device.
• Search from the Bluetooth device. After the device
detects the unit, select “OPEN” on the unit to connect
the device. (See page 15.)
*
2
For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter.
EN36-43_KD-R601_003A_4.indd 38EN36-43_KD-R601_003A_4.indd 38 19/12/08 11:30:30 AM19/12/08 11:30:30 AM
To Next Page
Loading...
Need help?
General
