JVC KD-RD88BT - User Manual

46 pages

Save Page as PDF

To Next Page

ENGLISH

FRANÇAIS

ESPAÑOL

B5A-1352-00 [K]

KD-R985BTS / KD-R885BTS / KD-R780BT /

KD-RD98BTS / KD-RD88BT

CD RECEIVER

INSTRUCTION MANUAL

RÉCEPTEUR CD

MANUEL D’INSTRUCTIONS

RECEPTOR CON CD

MANUAL DE INSTRUCCIONES

For customer Use:

Enter below the Model No. and Serial No. which are

located on the top or bottom of the cabinet. Retain this

information for future reference.

Model No.

Serial No.

JS_JVC_KD_R985BTS_K_C.indd 1 8/8/2016 9:46:39 PM

Questions and Answers

B
Brittany BellSep 23, 2025
What does “PLEASE WAIT” mean on my JVC KD-RD88BT?
- A
  Arthur ChristensenSep 23, 2025
  If “PLEASE WAIT” appears on your JVC Car Receiver, the unit is preparing to use the Bluetooth function. If the message does not disappear, turn off and turn on the unit, then connect the device again.
K
Kelly JarvisSep 23, 2025
What does “ERROR” mean on my JVC Car Receiver?
- E
  Elizabeth GutierrezSep 23, 2025
  If “ERROR” appears on your JVC Car Receiver, try the operation again. If “ERROR” appears again, check if the device supports the function you have tried.
S
Stephen WatsonSep 23, 2025
What does “H/W ERROR” mean on my JVC Car Receiver?
- R
  Ray LaraSep 23, 2025
  If “H/W ERROR” appears on your JVC Car Receiver, reset the unit and try the operation again. If “H/W ERROR” appears again, consult your nearest service center.
A
anthony59Aug 31, 2025
What to do if “CODE ERROR” appears on JVC KD-RD88BT?
- J
  John BeasleyAug 31, 2025
  If your JVC Car Receiver displays “CODE ERROR”, make sure you have entered the correct pass code.
S
Sandra WattsAug 25, 2025
Why is the sound interrupted or skipped during Bluetooth playback on my JVC KD-RD88BT Car Receiver?
- G
  Gregory DuncanAug 25, 2025
  If the sound is being interrupted or skipped during playback of a Bluetooth audio player on your JVC Car Receiver, reduce the distance between the unit and the Bluetooth audio player. You can also try turning the unit off and on again, then attempt to reconnect. Be aware that other Bluetooth devices might be trying to connect to the unit.
E
Elizabeth PeckAug 25, 2025
Why can't I hear sound on my JVC KD-RD88BT Car Receiver?
- J
  James TurnerAug 26, 2025
  If you cannot hear sound from your JVC Car Receiver, adjust the volume to the optimum level and check the cords and connections.
C
Carmen ShieldsAug 26, 2025
How to improve radio reception on JVC KD-RD88BT?
- F
  frostjamesAug 26, 2025
  To improve poor radio reception on your JVC Car Receiver, connect the antenna firmly.
C
chapmandonnaAug 27, 2025
Why is no Bluetooth device detected by my JVC KD-RD88BT Car Receiver?
- G
  gregorybrandonAug 27, 2025
  If no Bluetooth device is detected by your JVC Car Receiver, search from the Bluetooth device again or reset the unit.
C
Cheryl RoweAug 27, 2025
Why pairing cannot be made with JVC KD-RD88BT?
- M
  Megan BrownAug 27, 2025
  If pairing cannot be made with your JVC Car Receiver, ensure you have entered the same PIN code to both the unit and Bluetooth device. You can also delete pairing information from both the unit and the Bluetooth device, then perform pairing again.
R
robert55Aug 27, 2025
What to do if “MISWIRING CHECK WIRING THEN PWR ON” appears on JVC KD-RD88BT Car Receiver?
- M
  Matthew LongAug 28, 2025
  If the message “MISWIRING CHECK WIRING THEN PWR ON” appears on your JVC Car Receiver, turn the power off. Check to ensure the terminals of the speaker wires are properly insulated, then turn the power back on.