35
ENGLISH
To adjust subwoofer output—
Subwoofer
To adjust subwoofer level
Adjust the subwoofer output level.
• 00 (min.) to 12 (max.)
• Press
to adjust reproduced
frequency level and slope.
To select the cutoff frequency
Select an appropriate cutoff frequency level
according to the subwoofer connected.
• 31.5 Hz to 200 Hz
• Frequencies higher than the selected level are
cut off to the subwoofer.
To adjust the slope
Adjust the slope—continuity of sound among
speakers.
• –18 / –12 / –6 (dB)
• As the number becomes higher, the
reproduced band width shared among
speakers becomes wider.
To adjust the input level of each
source—VolAdjust
This setting is required for each source except
FM. Before making an adjustment, select an
appropriate source for which you want to make
an adjustment.
Once you have made an adjustment, it
is memorized, and the volume level will
automatically increase or decrease by adjusted
level whenever you change the source.
Adjust to match the input level to the FM sound
level.
• –5 (min.) to +5 (max.)
EN32-35_KD-SHX851[EX_EU]f.indd 35EN32-35_KD-SHX851[EX_EU]f.indd 35 05.4.8 8:49:39 PM05.4.8 8:49:39 PM
To Next Page
Loading...
Need help?
General
