27
ENGLISH
You can connect the external component to the CD changer jack on the rear using the Line
Input Adaptor KS-U57 (not supplied).
Preparations:
• For connecting the Line Input Adaptor KS-U57 and the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the following procedure, select the external input
correctly. (See “Selecting the external component to use” on page 28.)
1
Select the external component.
• If “LINE IN” does not appear on the display, see page 28
and select the external input (“LINE IN”).
2
Turn on the connected device and start playing the source.
3
Adjust the volume.
Note on One-Touch Operation:
When you press CD-CH, the power automatically comes on. You do not have to press
to turn on the power.
To turn up the
volume
To turn down
the volume
CD-
CH
EXTERNAL COMPONENT OPERATIONS
3
EN27-28.KD-SX650[J]/f 10/20/99, 3:04 PM27
To Next Page
Loading...
Need help?
General
