21
ENGLISH
CD CHANGER OPERATIONS
We recommend that you use one of the CH-X series
with your unit.
If you have another CD automatic changer, consult
your JVC car audio dealer for connections.
• For example, if your CD automatic changer is one of
the KD-MK series, you need a cord (KS-U15K) for
connecting it to this unit.
Before operating your CD automatic changer:
• Refer also to the Instructions supplied with your
CD changer.
• If no discs are in the magazine of the CD
changer or the discs are inserted upside down,
“NO DISC” will appear on the display. If this
happens, remove the magazine and set the
discs correctly.
• If “RESET 1” – “RESET 8” appears on the
display, something is wrong with the
connection between this unit and the CD
changer. If this happens, check the connection
and make sure the cords are connected firmly.
Then, press the reset button of the CD
changer.
200
Playing CDs
Select the CD automatic changer (CD-CH).
* If you have changed the “EXT IN” setting to
“LINE IN” (see page 19), you cannot select the
CD changer.
Playback starts from the first track of the first
disc.
All tracks of all discs are played back.
Elapsed playing time
Track number
Disc number*
* When “CLOCK” is set to “ON” (see page 19),
disc number will soon change to clock time.
Note on One-Touch Operation:
When you press CD CD-CH, the power automatically
turns on. You do not have to press to turn on
the power.
CD
CD-CH
*
EN21-23.KD-SX8250_SX780[J]f.pm5 22/12/01, 10:42 AM21
To Next Page
Loading...
Need help?
General
