To Next PageTo Next PageWhat to do if “iPod ERROR” appears on JVC KD-XD28BT Car Stereo System?
If the message “iPod ERROR” appears on your JVC Car Stereo System, try the following: 1. Reconnect the iPod. 2. Reset the iPod. 3. Turn the power off and on again by pressing and holding B SRC for error recovery.
What to do if the USB port is drawing more power than the design limit on JVC KD-XD28BT Car Stereo System?
If the USB port is drawing more power than the design limit on your JVC Car Stereo System: 1. Turn the power off and unplug the USB device. Then, turn on the power and reattach the USB device. 2. If this does not solve the problem, turn the power off (or reset the unit) before replacing with another USB device.
What to do if “UNRESPONSIVE DEVICE” appears on JVC KD-XD28BT?
If the message “UNRESPONSIVE DEVICE” appears on your JVC Car Stereo System, make sure the USB device is not malfunctioning and reattach the USB device.
Why correct characters are not displayed on JVC KD-XD28BT Car Stereo System?
This JVC Car Stereo System unit can only display uppercase letters, numbers, and a limited number of symbols. Also, depending on the display language you have selected, some characters may not be displayed correctly.
What to do if “PLEASE WAIT” appears on JVC KD-XD28BT?
If the message “PLEASE WAIT” appears on your JVC Car Stereo System, the unit is preparing to use the Bluetooth function. If the message does not disappear, turn off and turn on the unit, then connect the device again.
What does “NO INFO”/“NO DATA” mean on JVC KD-XD28BT Car Stereo System?
If the message “NO INFO”/“NO DATA” appears on your JVC Car Stereo System, it means the Bluetooth device cannot get the contact information.
Why is sound being interrupted or skipped during playback of a Bluetooth audio player on JVC KD-XD28BT Car Stereo System?
If sound is being interrupted or skipped during playback of a Bluetooth audio player on your JVC Car Stereo System: 1. Reduce the distance between the unit and the Bluetooth audio player. 2. Turn off, then turn on the unit and try to connect again. 3. Other Bluetooth devices might be trying to connect to the unit.
What to do if “PROTECTING SEND SERVICE” appears on JVC KD-XD28BT Car Stereo System?
If the message “PROTECTING SEND SERVICE” appears, you should send the JVC Car Stereo System to the nearest service center.
What to do if “MISWIRING CHECK WIRING Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again.” appears on my JVC KD-XD28BT Car Stereo System?
If you see “MISWIRING CHECK WIRING Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again.”, turn the power off. Make sure that the terminals of the speaker wires are properly insulated, then turn the power back on.
What to do if no Bluetooth device is detected on JVC KD-XD28BT?
If no Bluetooth device is detected by your JVC Car Stereo System: 1. Search from the Bluetooth device again. 2. Reset the unit.
General| Bluetooth | Yes |
|---|---|
| Display Type | LCD |
| Dimensions | 7.21 x 2.09 x 6.22 inches |
| AUX Input | Yes |
| CD Player | No |
| Radio Tuner | AM/FM |
| Detachable Faceplate | Yes |
| Steering Wheel Control Ready | Yes |
| Android Music Playback | Yes |
| iPhone/iPod Music Playback | Yes |
| Display | LCD |
| Steering Wheel Control | Yes |
| Built-in Microphone | Yes |
| Power Output | 4 x 50W |
| Audio Formats Supported | MP3, WMA |
| Equalizer | 13-band |
| USB Port | Yes, Front |
| Preamp Outputs | 1 Pair (Rear/Subwoofer Selectable) |
| Pre-amp Outputs | 1 Pair (Rear/Subwoofer Selectable) |
Steps for initial setup, including crossover and clock settings.
Customizing sound with EQ settings, bass boost, and loudness.
Resolving issues related to sound, unit operation, and radio reception.
Addressing problems with USB/iPod connectivity.
Resolving SiriusXM and Bluetooth connectivity issues.
Understanding and recovering from device error messages.
Components for installation and step-by-step mounting instructions.
How to install the unit and connect wiring harness and components.
