14
ENGLISH
Using the Sound Control Memory
You can select and store a preset sound adjustment suitable to each playback source.
(Advanced SCM)
Selecting and storing the sound modes
Once you select a sound mode, it is stored in memory, and will be recalled every time you
select the same source. A sound mode can be stored for each of the following sources —
FM1, FM2, FM3, AM, Tape, CD-Changer and external components.
• If you do not want to store the sound mode separately for each playback source, but want
to use the same sound mode for all the sources, see “Canceling Advanced SCM” on page
16.
1
1
Select the sound mode you want.
Each time you press the button, the sound mode changes
as follows:
• If the “Link” indicator is lit on the display (with “SCM LINK”
set to “LINK ON”—see page 16), the selected sound mode
can be stored in memory for the current souce, and the
effect applies to the current souce.
• If the “LINK” indicator is NOT lit on the display (with “SCM
LINK” set to “LINK OFF”), the selected sound mode effect
applies to any source.
Indication For: Preset values
Bass Treble Loudness
SCM OFF (Flat sound) 00 00 On
BEAT Rock or disco music +2 00 On
POP Quiet background music +4 +1 Off
SOFT Light music +1 –3 Off
“Link” indicator
EN12-17.KS-FX250[J]/1 12/17/99, 6:24 PM14
To Next Page
Loading...
Need help?
General
