ENGLISH
9
TAPE OPERATIONS
Listening to a tape
1
Insert a cassette.
The unit turns on and tape play starts automatically.
When one side of the tape reaches its end during play, the
other side of the tape automatically starts playing. (Auto
Reverse)
2
Select the tape direction.
Each time you press the button, the tape direction changes
alternatively – forward (
) and reverse ( ).
To stop play and eject the cassette
Press 0.
Tape play stops and the cassette automatically ejects from the cassette compartment.
If you change the source to AM/FM or TAPE, the tape play also stops (without ejecting the
cassette this time).
• You can also eject the tape with the unit turned off.
Note on One-Touch Operation:
When a cassette is already in the cassette compartment, pressing TAPE xc turns on the
unit and starts tape play automatically.
21
EN09-11.KS-FX250[J]/1 12/17/99, 6:22 PM9
To Next Page
Loading...
Need help?
General
