16
ENGLISH
Canceling Advanced SCM
You can cancel the Advanced SCM (Sound Control Memory), and unlink the sound modes
and the playback sources.
When shipped from the factory, a different sound mode can be stored in memory for each
source so that you can change the sound modes simply by changing the sources.
LINK ON: Advanced SCM (different SCMs for different sources)
LINK OFF: Conventional SCM (one SCM for all sources)
21,4
3
1
Press and hold SEL for more than 2 seconds.
“CLOCK H”, “CLOCK M”, “SCM LINK”, “LEVEL”, “AREA”
“B.SKIP” or “LINE IN
★
” appears on the display.
★
Displayed only when one of the following sources is selected—
FM, AM and TAPE.
2
Select “SCM LINK” if not shown on the display.
3
Select the desired mode — “LINK ON” or
“LINK OFF”.
4
Finish the setting.
EN12-17.KS-FX250[J]/1 12/17/99, 6:24 PM16
To Next Page
Loading...
Need help?
General
