ENGLISH
19
Selecting the level display
You can select the level display according to your preference.
When shipped from the factory, “AUDIO 2” is selected.
AUDIO1: Shows the audio level indicator.
AUDIO2: Alternates “AUDIO 1” setting and illumination display.
OFF : Erases the audio level indicator.
1
Press and hold SEL for more than 2 seconds.
“CLOCK H”, “CLOCK M”, “SCM LINK”, “LEVEL”, “AREA”,
“B.SKIP” or “LINE IN
★
” appears on the display.
2
Select “LEVEL” if not shown on the display.
3
Select the desired mode — “AUDIO 1”,
“AUDIO 2” or “OFF”.
4
Finish the setting.
2
3
1
4
★
Displayed only when one of the following sources is selected —
FM, AM and TAPE.
EN18-20.KS-FX250[J]/1 12/17/99, 6:29 PM19
To Next Page
Loading...
Need help?
General
