JVC KW-V620BT - iPod;iPhone; Connecting and Setting Up iPod;iPhone

ENGLISH 17
iPod/iPhone
iPod/iPhone
Preparation
R Connecting iPod/iPhone
• For details about connecting iPod/iPhone, see
page62 .
• For playable iPod/iPhone types, see page67.
Connect your iPod/iPhone according to your
purpose or the type of iPod/iPhone.
Wired connection
• To listen to music:
– For Lightning connector models: Use USB
Audio cable for iPod/iPhone—KS-U62 (optional
accessory).
– For 30-pin connector models: Use 30-pin to USB
cable (accessory of iPod/iPhone).
• To watch video and listen to music:
– For Lightning connector models: Use the HDMI
cable KS-U60 (optional accessory) and KS-U62
(optional accessory) through a Lightning-Digital
AV adapter (accessory of the iPod/iPhone).
– For 30-pin connector models: Use USB Audio
and Video cable for iPod/iPhone—KS-U59
(optional accessory).
Bluetooth connection
Pair the iPod/iPhone through Bluetooth. (Page37)
• For Lightning connector models: To watch video,
connect your iPod/iPhone to the HDMI/MHL
input terminal using KS-U60 (optional accessory).
(Page62 )
• For 30-pin connector models: You cannot watch
video with a Bluetooth connection.
R Selecting the iPod/iPhone device to
play and connection method
When connecting the iPod/iPhone device for the
first time, the setup screen (for connection, etc.)
appears. Follow the procedure on the setup screen
to configure the settings.
1 Display the <iPod Settings> screen.
On the Home screen:
• If [Enter] for <iPod Setup> cannot be
selected, turn off the AV source. (Page6)
2
• If you do not need to change the settings,
press [OK] to exit the setup screen.
3
Select the connection method (1), then
press [Next] (2).
<USB +
AV-IN>
Select this when the iPod/
iPhone is connected using
KS-U59 (optional accessory).
<USB 1 Wire> Select this when the iPod/
iPhone is connected using a
USB 2.0 cable (accessory of
the iPod/iPhone) or KS-U62
(optional accessory).
<HDMI +
Bluetooth>
Select this when the iPod/
iPhone is connected using
HDMI cable KS-U60 (optional
accessory) and KS-U62 (optional
accessory) through a Lightning-
Digital AV adapter (accessory of
the iPod/iPhone).
<Bluetooth> Select this when the iPod/
iPhone is connected via
Bluetooth.
• When selecting <USB + AV-IN> or <USB 1
Wire>, go to step 5.
Continued on the next page...
2016KW-VMidK.indb17 2015/12/1018:05