SETTINGS
R Updating the system
You can update the system by connecting a USB
device containing an update file.
• To update the system, visit <http://www.jvc.net/
cs/car/>.
1 Create an update file, copy it to a USB
device, and connect the device to the unit.
• To connect a USB device, see page62 .
2 Display the <System Information>
screen.
On the Home screen:
• Press [K] repeatedly to change the page on
the <System> menu screen.
3
<Application
Version>
Updates the system
application.
<System Version> Updates the system.
<Bluetooth
Version>
Updates the Bluetooth
application.
It may take a while.
If the update has been completed successfully,
“Update Completed” appears. Reset the unit.
• To finish the procedure, press [
].
• Do not disconnect the USB device while updating.
• If the update has failed, turn the power off and
then on, and retry the update.
• Even if you have turned off the power during the
update, you can restart the update after the power
is turned on. The update will be performed from
the beginning.
Setting menu items
R Displaying the <Settings> menu screen
1 Display the <Settings> screen.
On the Home screen:
2 Select the setting menu.
To Next Page
Loading...
