OTHER EXTERNAL COMPONENTS
Using a smartphone—HDMI/MHL
R What is HDMI/MHL?
HDMI stands for High Definition Multi-media
Interface. HDMI connections can transfer digital
video source signals (such as from a DVD player)
without converting them to analog.
A new feature that has been added to HDMI that
extends its capabilities further is MHL, or Mobile
High-definition Link.
Both interfaces allow your smartphone to connect to
the device. When it is connected, you can see your
smartphone’s screen on the monitor.
R Displaying the screen of the
smartphone
You can display the screen of smartphones
connected via the HDMI/MHL input terminal.
1 Connect your smartphone to the HDMI/
MHL input terminal. (Page63 )
• Use HDMI cable KS-U60 (optional accessory)
or MHL cable KS-U61 (optional accessory).
2 Select “HDMI/MHL” as the source.
(Page8)
3 Start an application or playback on your
smartphone.
Using an external monitor— Rear
Source
You can enjoy the rear source playback on an
external monitor connected to the AV-OUT VIDEO
and AV-OUT AUDIO terminals, while listening to any
source.
R Displaying rear source images on the
external monitor
1 Display the <Rear Source> screen.
On the Home screen:
2 Select the rear source.
• To close the <Rear Source> screen, press
[
].
While activating rear source...
• To view a front source image on the rear monitor,
press [Same as Front] on the <Rear Source>
screen.
• If the selected source is not “DISC” or “AV-IN”,
nothing appears on the rear monitor.
Using an external component via
ADS adapter—Maestro
(Only for
KW-V620BT Region 1)
You can control the sources from the component via
ADS adapter.
Preparation:
Configure the settings on the <Parking Assist
Disp.>
/<Parking Assist Pos.>
/<Maestro Setup>
screens beforehand. (Pages55 – 56)
1 Connect the ADS adapter to the iDatalink
input terminal. (Page63)
2 Select “Maestro” as the source.
(Page8)
3 Turn on the connected component and
start playing the source.
To Next Page
Loading...
