JVC KW-V620BT - TUNER; Radio Reception and Tuning

26
TUNER
TUNER
Listening to the radio
Preparation: Select the appropriate tuner
channel interval for <Area Setting>. (Page 27)
R Indications and buttons on the source
control screen
2
76
1
5
8
3 4
Tuner reception information
1 Band
2 Preset no.
3 The station frequency currently tuned in/PS
(station name) for FM RBDS when a PS signal is
coming in
4 Text information
• Touching the text scrolls it if not all of the text
is shown.
5 Information type
• Touching the information type switches the
information between Radio Text, Radio Text
Plus, and PTY code.
6 TP indicator (Page28)
7 ST/MO indicator
• The ST indicator lights up when receiving an
FM stereo broadcast with sufficient signal
strength.
8 DX/LO indicator (See the far right column.)
Operation buttons
[ ]
Displays the other operation button
window.
• To hide the window, press [
].
[
]
Displays the <Preset List> screen.
(Page28)
• To close the <Preset List> screen,
press [
].
[FM] Selects the FM band.
[AM] Selects the AM band.
[P1] – [P6] • Selects a stored station. (Press)
• Stores the current station. (Hold)
[FNC J]
Displays the pop-up short-cut menu.
(Page9)
• To close the menu, press [K].
[PTY]* Enters PTY search mode. (Page28)
[SSM
]*
Presets stations automatically. (Hold)
(Page27)
[S] [T]
Searches for a station.
• Auto search (Press)
• Manual search (Hold)
[MODE] Changes the settings for tuner
reception on the <Mode> screen.
(Pages26 – 27)
[TP]* Activates/deactivates TA standby
reception mode. (Page28)
[MONO]* Activates/deactivates monaural mode
for better FM reception. (Stereo effect
will be lost.)
• The MONO indicator lights up while
monaural mode is activated.
• To display all available operation buttons, press
[
] to display the other operation button
window.
* Appears only when FM is selected as the source.
R Tuning in FM stations only with strong
signals—LO/DX (Local/Distance-
extreme)
1 Display the <Mode> screen.
2
The unit tunes in only to stations with sufficient
signal strength. The LO indicator lights up.
To deactivate the Local function: Press [DX]. The
DX indicator lights up.
2016KW-VMidK.indb26 2015/12/1018:05