JVC KW-V620BT - Station Presets and Signal Optimization

ENGLISH 27
TUNER
TUNER
R Reducing interference during FM
reception
1 Display the <Mode> screen. (Page26)
2
The tuner selectivity is increased to reduce
interference between adjacent stations. (Stereo
effect may be lost.)
To restore the sound quality: Press [Wide].
• Reception may be subject to interference from
adjacent stations when [Wide] is selected, but
sound quality will not be degraded and the stereo
effect will remain.
R Changing the tuner channel interval
The tuner channel interval changes depending on
the area you use this unit.
1 Display the <Mode> screen. (Page26)
2
[US] Select this when using in North/
Central/South America. FM/AM
intervals are set to 200 kHz/10 kHz.
[SA] Select this when using in South
American countries where the FM
interval is 50 kHz. The AM interval is
set to 10 kHz.
[Europe] Select this when using in any other
areas. FM/AM intervals are set to
50 kHz/9 kHz.
• The initial setting is [US] for KW-V620BT
Region 1, and [SA] for KW-V620BT Region 4.
Presetting stations
R Storing stations in the memory
You can preset 6 stations for each band.
Automatic presetting — SSM (Strong-station
Sequential Memory)
(Hold)
The local stations with the strongest signals are
found and stored automatically.
Manual presetting
1 Tune in to a station you want to preset.
(Page26)
2 Select a preset number.
(Hold)
The station selected in step 1 is stored.
2016KW-VMidK.indb27 2015/12/1018:05