OTHER EXTERNAL COMPONENTS
Using external audio/video
players—AV-IN
When the operation buttons are
not displayed on the screen, touch
the area shown on the illustration.
• To change settings for video
playback, see page 49.
R Starting playback
1 Connect an external component to the
AV-IN1 input terminal. (Page
63 )
2 Select “AV-IN” as the source. (Page8)
3 Turn on the connected component and
start playing the source.
R Changing the AV-IN name
You can change the AV-IN name displayed on the
“AV-IN” source control screen.
1 Display the <Mode> screen.
2 Select an AV-IN name.
• This setting does not affect the source name
displayed on the Home screen.
Using the rear view camera
• To connect a rear view camera, see page63 .
• To use a rear view camera, a REVERSE lead
connection is required. (Page 61 )
R Settings for the rear view camera
1 Display the <Input> settings screen.
On the Home screen:
2
[ON] Displays the picture from the rear view
camera when you shift the gear to the
reverse (R) position.
[OFF] Select this when no camera is
connected.
To Next Page
Loading...
