SiriusXM® Satellite Radio
TuneStart™
When you select a SmartFavorites channel, you can
listen to the current song from the beginning.
Activating TuneStart™
1 Display the <Mode> screen.
2
To deactivate TuneStart: Select [OFF] for
<TuneStart>.
TuneScan™
When you activate TuneScan™, you will hear 6
seconds of the songs, which have not been listened
to, from each of the music channel presets on the
current Band and the currently tuned channel.
The unit starts scanning.
• To select the previous/next content, press [S]
or [T].
• To end scanning and continue listening to the
current song/content, press [SCAN].
• To exit scanning, press and hold [SCAN].
Setting reception restrictions
R Setting the parental control
You can limit access to SiriusXM channels, such as
those with mature content.
Setting/Changing the parental code
• The initial setting is “0000.”
• Changing the code does not change the
<Parental Control>
/<Parental Lock Channel>
settings.
1 Display the <Mode> screen. (See the far
left column.)
2 Display the <Parental Code Check>
screen.
3 Enter the current code in <Current Code>,
a new code in <New Code>, and then the
new code again to confirm the entry in
<Confirm Code>.
1
Enter a code.
2
Confirm the entry.
• Press [Clear] to delete the entry.
To change the parental code: Press [Change] in
step 1, enter the current code, then a new code in
step 2.
To Next Page
Loading...
