JVC KW-V620BT - Managing Bluetooth Connections and Settings

ENGLISH 39
BLUETOOTH
BLUETOOTH
R Connecting/disconnecting a registered
Bluetooth device
Two devices can be connected simultaneously.
1 Display the <Bluetooth Setup> screen.
(Page38)
2
3 Select the device you want to connect (1),
then press [Connection] (2).
4 Select [ON] or [OFF] for the target.
:
Mobile phone
:
Audio device
• The status is shown as follows:
– “Connected”: A connection has been
established.
– “Connect Ready”: A connection can be
established.
– “Disconnected”: No connection is
established.
• Press [Change] for <APP Setup> to display
the <APP Settings> screen to configure
settings for applications of iPod/iPhone/
Android. (Page46)
• When a Bluetooth mobile phone is connected,
the signal strength and battery level are displayed
when the information is acquired from the device.
R Deleting a registered Bluetooth device
1 Display the <Bluetooth Setup> screen.
(Page38)
2
3 Select a device to delete (1), then press
[Remove] (2).
A confirmation message appears. Press [Yes].
2016KW-VMidK.indb39 2015/12/1018:05