SETTINGS
R Changing the aspect ratio
You can change the aspect ratio for video playback.
• You cannot change the aspect ratio while playing
a USB device.
1 Display the aspect ratio selection screen.
On the source control screen:
2 Select the aspect ratio.
<Full>* For 16:9 original pictures
4:3 signal 16:9 signal
<Normal>* For 4:3 original pictures
4:3 signal 16:9 signal
<Just> For viewing 4:3 pictures
naturally on the wide screen
4:3 signal 16:9 signal
<Zoom1> −
<Zoom3>
Changes the magnification.
• The aspect ratio is
automatically selected to
match the video source.
* While DivX is played back with <Screen Ratio> set to [16:9]
(Page 14), the aspect ratio may not set correctly.
R Zooming the picture
You can zoom the picture (<Full>, <Zoom1> to
<Zoom3>). Zooming is available only when discs
are played back.
• When the aspect ratio is set to <Just>, the picture
is zoomed with the aspect ratio of the <Full>
setting.
1 Display the magnification level selection
screen.
On the source control screen:
2 Change the magnification (1), then move
the zooming frame (2).
• [J][K][H][I] are not displayed when <Full> is
selected.
• The zoom function cannot be used for some video
sources.
To Next Page
Loading...
