JVC KW-V640BT - Page 19

Touching the operation keys performs the following
actions:
1
[TI]* (For FM RBDS features)
Activates TI standby reception mode.
• When TI is activated, the unit is ready
to switch to traffic information if
available. The TI indicator lights up in
white.
• If the TI indicator lights up in orange,
tune into a station providing Radio
Broadcast Data System signals.
• The volume adjustment for traffic
information is automatically
memorized. The next time the unit
switches to traffic information, the
volume is set to the memorized level.
• To deactivate, touch [TI] again.
[SETUP] Displays the <TUNER SETUP> screen.
[MONO]* Activates monaural mode for better FM
reception (stereo effect will be lost).
• The MONO indicator lights up while
monaural mode is activated.
• To deactivate, touch [MONO] again.
[PTY]* (For FM RBDS features)
Enters PTY search mode.
1 Touch a PTY code.
2 Touch [Search] to search for.
If there is a station broadcasting a
program of the same PTY code as you
have selected, that station is tuned in.
[SSM]*
Presets stations automatically.
7
[S]/[T]
Searches for a station.
• The search method differs according
to the selected seek mode.
* Appears only when FM is selected as the source.
Changing the tuner channel interval
Select the tuner channel interval depending on the
area you use this unit.
1 Display the <TUNER SETUP> screen.
On the source control screen, touch as follows:
2 Select the area you are listening to tuner.
TunerTuner
[North
America]
Select this when using in North/
Central America where FM/AM
intervals are set to 200 kHz/10 kHz.
[South
America]
Select this when using in South
America where FM/AM intervals are
set to 50 kHz/10 kHz.
[Europe] Select this when using in Europe
where FM/AM intervals are set to
50 kHz/9 kHz.
• For KW-V640BT Region 1, [North America] is
initially selected, and for KW-V640BT Region 4,
[South America] is initially selected.
Storing preset stations in the memory
You can preset 15 stations for FM and 5 stations for
AM.
Automatic presetting — SSM (Strong-
station Sequential Memory) (for FM only)
On the source control screen, touch as follows:
A confirmation message appears. Touch [Yes].
The local stations with the strongest signals are found
and stored automatically.
17
ENGLISH
ENKW-V2018TCKR.indb17ENKW-V2018TCKR.indb17 2017/12/049:412017/12/049:41