JVC KW-V640BT - Component Names and Operations; Basic Operations; Turning on the Power; Turning off the Power

Component Names and Component Names and
OperationsOperations
Basic OperationsBasic Operations
1 Volume +/– buttons
2 Loading slot
3 FNC button
• (Press) Turns on the power.
• (Press) Pops up the short-cut menu while the
power is on.
• (Hold) Activates the voice dialing.
4 Monitor panel
5 Screen (touch panel)
6 Remote sensor*
* DO NOT expose the remote sensor to bright light (direct sunlight
or artificial lighting).
Turning on the power
Turning off the power
1 Display the source/option selection
screen.
On the Home screen, touch as follows:
2 Turn off the power.
Turning off the AV source
1 Display the source/option selection
screen.
On the Home screen, touch as follows:
2 Turn off the AV source.
Adjusting the volume
You can adjust the volume (00 to 40) by pressing + to
increase and pressing – to decrease.
• Holding + increases the volume continuously to
level 15.
Attenuating the sound
On the source control screen, touch as follows:
The ATT indicator lights up.
To cancel attenuation: Touch [ ] again.
Turning off the screen
1 Display the pop-up short-cut menu.
2 Turn off the screen.
(Hold)
To turn on the screen: Press FNC on the monitor
panel or touch the screen.
3
ENGLISH
ENKW-V2018TCKR.indb3ENKW-V2018TCKR.indb3 2017/12/049:412017/12/049:41