JVC KW-V640BT - Tuner

Listening to the radio
Playback information on the source control
screen
FM 01
FM 02
FM 03
FM 04
TUNER
E.g. Tuner source control screen for KW-V640BT
Region 1
1 Displays/hides other available operation keys*
2 Preset no.
3 Changes the seek mode for [S]/[T]
• AUTO1 (Initial): Auto search
• AUTO2: Tunes in preset stations one after
another
• MANUAL: Manual search
4 Text information
• Touching [<] scrolls the text if not all of the text
is shown.
• Touching [ ] switches the information (e.g.
frequency, PS name, Radio Text, title, artist, etc.).
−The availability of the information vary
depending on the reception, selected station.
TunerTuner
5 Preset list
6 Selects the band (AM/FM)
7 Operation keys*
8 Indicators
• TI: Lights up in white when receiving the traffic
information, and lights in orange when being
standby for Traffic Information Reception.
• ST: Lights up when receiving stereo broadcast.
• MONO: Lights up when receiving stations in
monaural forcibly.
* See the following “Operation keys on source control screen”.
Operation keys on source control screen
• The appearance of the operation keys may differ,
however the similar operation keys have the same
operations.
• See also “Common operation keys on source control
screen” on page 7.
Switching to the App screen while listening
to the another source
You can display the App screen while listening to the
other source.
• Set <DISP Key> to [App] on the <User Interface>
screen beforehand. (Page 46)
1 Display the pop-up short-cut menu.
2 Switch to the App screen.
On the pop-up short-cut menu, touch as follows:
• Each time you touch the key, the screen switches
between the current source and App screen.
Apps—WebLink™/WazeApps—WebLink™/Waze
16 ENGLISH
ENKW-V2018TCKR.indb16ENKW-V2018TCKR.indb16 2017/12/049:412017/12/049:41