JVC KW-V640BT - Page 39

37ENGLISH
C When item 5 is selected in step 2:
Say the name of the person you want to
call.
• You can also make voice dialing by pressing and
holding the FNC on the monitor panel.
• Available only when the connected mobile
phone has a voice recognition system.
• If the unit cannot find the target, “Press [Restart]
to restart the voice recognition process.” appears.
Touch [Restart], then say the name again.
• To cancel voice dialing, touch [Stop].
Switching between two connected devices
You can change the device to use when two devices
are connected.
On the phone control screen:
The active device is highlighted.
Bluetooth®Bluetooth®
Presetting phone numbers
You can preset up to eight phone numbers.
1 Display the <Edit Preset Dial> screen.
On the Home screen, touch as follows:
Then, on the phone control screen, touch as
follows:
[ ] → [Edit]
2 Select a position to store into.
3 Select a method to add a phone number
to preset list and register the number to
the preset list (
1), then touch [Close] (2).
[Add
number from
phonebook]
Select a phone number from
the phonebook.
[Add number
direct]
Enter a phone number on the
direct number entry screen,
then touch [Set] to add to the
preset list.
• To display the preset list, touch [
] on the phone
control screen.
To delete a phone number from the preset list:
Select the phone number to delete on the <Edit
Preset Dial> screen, then touch [Delete] in step 3.
To delete all phone numbers from the preset list:
Touch [Delete all] on the <Edit Preset Dial> screen
in step 2.
ENKW-V2018TCKR.indb37ENKW-V2018TCKR.indb37 2017/12/049:412017/12/049:41