41ENGLISH
SettingsSettings
Store your own sound adjustments
1 Select a preset sound mode.
2 Select a band (1) and adjust the level (2),
then adjust the sound (
3).
Graphic Equalizer
ALL SRC
Preset Select
Bass EXT SW Level
0
USB
Initialize Memory
ON OFFOFF
Adjust the sound as follows:
<Bass EXT>
Activates/deactivates bass.
• ON/OFF (Initial)
<SW LEVEL>
Adjusts the subwoofer level.*
• –50 to +10 (Initial: 0)
3 Repeat step 2 to adjust the level of other
bands.
4 Touch [Memory] to store adjustment.
A user selection window appears. Select from
[User1] to [User4] to store your adjustment, then
touch [Close] to close the window.
• To apply the adjusted equalizer to all playback
source, touch [ALL SRC], then touch [OK] to
confirm.
• To clear the adjustment, touch [Initialize].
* Not adjustable when <None> is selected for subwoofer on the
<Speaker Select> screen. (Page 40)
<Position/DTA>
You can adjust the sound effects according to your
listening position. You can also localize the sound
image in front of the selected seat.
Setting the listening position
Touch [Listening Position] (1), then select
the listening position ([Front L], [Front R],
[Front All]*, or [All]) (
2).
Front FocusListening Position
Front L
Front All
Front R
All
Adjust
Position/DTA
* [Front All] is selectable only when <X’over Network> is set to
[2way].
<Equalizer>
The following adjustments are memorized for each
source until you adjust the sound again. If the source
is a disc, the adjustments are stored for each of the
following categories.
• DVD/VCD
• CD
• Audio/video files (Page 54)
You cannot adjust the sound when the unit is in
standby.
Selecting a preset sound mode
1 Display the preset sound modes.
2 Select a preset sound mode.
• Pop/Hip Hop/R&B/Jazz/Classical/Hard Rock/
Flat (Initial)/iPod/User1/User2/User3/User4
Graphic Equalizer
ALL SRC
iPod
Flat
Pop
iPod
Hip Hop
User1
R&B
User2
Jazz
User3
Classical
User4
Hard Rock
To hide the preset sound modes: Touch [ ] .
ENKW-V2018TCKR.indb41ENKW-V2018TCKR.indb41 2017/12/049:412017/12/049:41