JVC KW-V840BT - Tuner - Basic Operation; Tuner Basic Operation

Tuner
35English
Tuner
Tuner Basic Operation
Most functions can be controlled from the
source control screen.
To enter Tuner source, touch [TUNER] icon in
the source selection screen. (P.11)
Control screen
2
5
3
4
1
Preset list screen
4
6
7
1
Information display
Displays the information of the current station:
Frequency
Touching [
] allows you to switch between
Content A and Content B.
Content A: PS name, Radio Text, Title & Artist
Content B :PTY Genre, Radio Text plus
Preset#: Preset number
2
Seek mode
Switches the seek mode in the following
sequence; [AUTO1], [AUTO2], [MANUAL].
• [AUTO1]: Tunes in a station with good
reception automatically.
• [AUTO2]: Tunes in stations in memory one
after another.
• [MANUAL]: Switches to the next frequency
manually.
3
Operation keys
• [E] [F] : Tunes in a station. The method of
frequency switching can be changed (see 2
in table).
• [
] : Touch to attenuates/restores the sound.
4
Preset list
• Recalls the memorized station.
• When touched for 2 seconds, stores the
current receiving station in memory.
• Touch on the right side of the screen to display
the Preset list. Touch again to close the list.
5
Function panel
Touch on the left side of the screen to display
the function panel. Touch again to close the
panel. For details on the keys, see Function
panel (P.36).
6
Band button
Switches the band (FM, AM).
7
Indicator Items
• [ST]: A stereo broadcast is being received.
• [MONO]: The forced monaural function is on.
• [TI]: Indicates the reception state of traffic
information.
White: TP is being received.
Orange: TP is not being received.
!B5A-2303-00b_18KWV-K_En.indb 35 2018/01/09 18:26