Bluetooth Control
64
Hands-Free Setup
You can perform various setup about
handsfree function.
1
Press the [FNC] button.
Popup menu appears.
2
Touch [ ].
HOME screen appears.
3
Touch [ ].
SETUP Menu screen appears.
4
Touch [Bluetooth].
Bluetooth SETUP screen appears.
5
Touch [TEL SETUP].
TEL SETUP screen appears.
6
Set each item as follows.
■ [Bluetooth HF/Audio]
Select the speakers to output the sound from
cell-phone (such as phone call voice and
ringing tone) and Bluetooth audio player.
[Front]: Outputs from the front speakers.
[All ](Default): Outputs from all speakers.
■ [Auto Response]*
Sets an automatic response time to pick-up
an incoming call.
[OFF ](Default): Automatic response is not
available.
[1]/ [5]/ [10]/ [15]/ [20]/ [25]/ [30]: Set calling
ring time (second).
■ [Auto Pairing]
When set to “ON”, the Apple Auto Pairing
function is turned on to automatically
register the iPod touch or iPhone connected
to this unit.
[ON ](Default): Uses Apple Auto Pairing
function.
[OFF]: Not uses Apple Auto Pairing function.
■ [Sort Order]
Sets how to arrange the cell-phone
phonebook.
[First]: Arranges in the order of first name.
[Last ](Default): Arranges in the order of last
name.
■ [Echo Cancel Level]
Adjusts the level of echo cancellation.
Default is “0”.
■ [Noise Reduction Level]
Reduces the noises generated by
surrounding environment without changing
the microphone volume. Use this setting
when the voice of caller is not clear. Default
is “0”.
* Either the time interval for automatic
answer set on this unit or the time
interval set on the cell-phone, whichever
is shorter takes effect.
7
Touch [OK].
!B5A-2303-00b_18KWV-K_En.indb 64 2018/01/09 18:26
To Next Page
Loading...
