JVC KW-V840BT - Controlling Audio - EQ and Volume; EQ Curve Management & Volume Offset

Controlling Audio
74
Ñ Recall the EQ curve
1
Touch [Preset Select].
2
Select EQ curve.
NOTE
• [iPod] is available only during iPod source.
Ñ Save the EQ curve
1
Adjust the EQ curve.
2
Touch [Memory].
3
Select where to save.
Volume Offset
Finely adjust the volume of the current source
to minimize the difference in volume between
different sources.
1
Press the [FNC] button.
 Popup menu appears.
2
Touch [ ].
 HOME screen appears.
3
Touch [ ].
 Source selection screen appears.
4
Touch [Audio].
 Audio screen appears.
5
Touch [Volume Offset].
6
Touch [+] or [−] to adjust the level.
■ [Initialize]
Returns to the initial settings.
* If you have increased the volume first, then
reduced the volume using the “Volume
Offset”, the sound generated if you suddenly
switch to another source may be extremely
loud.
Zone Control
You can select different sources for both front
and rear positions in the vehicle.
1
Press the [FNC] button.
 Popup menu appears.
2
Touch [ ].
 HOME screen appears.
3
Touch [ ].
 Source selection screen appears.
4
Touch [Audio].
 Audio screen appears.
!B5A-2303-00b_18KWV-K_En.indb 74 2018/01/09 18:26