To Next PageTo Next PageHow to improve phone sound quality on JVC Car Receiver?
If the phone sound quality is poor on your JVC Car Receiver: * Reduce the distance between the unit and the Bluetooth mobile phone. * Move the car to a location with better signal reception.
How to resolve sound interruptions with Bluetooth on JVC KW-XR816?
If the sound is interrupted or skipped during playback of a Bluetooth audio device on your JVC Car Receiver: * Reduce the distance between the unit and the Bluetooth audio device. * Disconnect the device connected for Bluetooth Phone. * Turn the unit off, then on again. * Reconnect the Bluetooth audio device if the sound is not restored.
Why does “Reading” keep flashing on my JVC KW-XR816 Car Receiver?
If “Reading” keeps flashing on the display of your JVC Car Receiver: * Readout time varies depending on the USB device. * Avoid using too many hierarchy levels and folders. * Turn the power off and then on again. * Do not repeatedly pull out or connect the USB device while “Reading” is displayed.
What causes interrupted disc sound on my JVC KW-XR816?
If the disc sound is sometimes interrupted on your JVC Car Receiver: * Stop playback while driving on rough roads. * Try changing the disc. * Check the cords and connections.
Why won't my JVC KW-XR816 play CD-R or CD-RW discs?
If your JVC Car Receiver is unable to play CD-R/CD-RW discs: * Ensure that the CD-R/CD-RW is finalized. * Finalize the CD-R/CD-RW with the same component you used for recording.
Why is there static noise on my JVC Car Receiver radio?
If you're experiencing static noise while listening to the radio on your JVC Car Receiver, make sure the antenna is firmly connected.
What does “Please Eject” mean on my JVC Car Receiver display?
If “Please Eject” appears on the display of your JVC Car Receiver, this can occur due to overheating. Eject the disc or change to another playback source.
Why won't my JVC KW-XR816 detect my Bluetooth device?
If your JVC Car Receiver is not detecting your Bluetooth device, try the following: * Search for the device again from the Bluetooth device. * Reset the unit and then search for the Bluetooth device again.
General| Brand | JVC |
|---|---|
| Model | KW-XR816 |
| Category | Car Receiver |
| Language | English |
Important safety information regarding Class 1 Laser Products.
Guidelines for safe driving and general unit operation, including volume limits.
Cautions regarding car interior temperature effects and volume settings.
Explanation of icons and symbols used throughout the manual for clarity.
Step-by-step instructions to perform a factory reset on the unit.
Procedure to eject a disc when it is locked or stuck in the unit.
Instructions to disable the automatic display demonstration mode.
Step-by-step guide to accurately set the current time on the unit.
Instructions for initial setup of the remote controller, including removing the insulation sheet.
Guide on how to safely replace the lithium coin battery in the remote controller.
Important warnings and cautions for safe and proper use of the remote controller.
Identification of key buttons and functions on the main unit and its display.
Instructions on how to change the display information and various patterns.
Detailed explanation of the functions associated with each button on the main unit.
Detailed explanation of the functions associated with each button on the remote controller.
How to manually search for and tune radio stations for optimal reception.
Steps to take when FM stereo broadcasts are difficult to receive clearly.
Guide to automatically preset up to 18 FM stations using the SSM feature.
How to manually store up to 18 FM and 6 AM stations for quick access.
Instructions on how to recall stored radio stations using the unit's buttons.
Procedure to assign custom titles to radio station frequencies for easier identification.
How to stop playback, eject discs, and prohibit disc ejection from the unit.
Instructions on how to select folders and specific tracks on a disc.
Using the search menu to efficiently navigate and find specific files on MP3/WMA discs.
How to set repeat and random playback modes for disc media.
How to connect and play MP3/WMA/WAV files from USB storage devices.
Instructions on how to stop playback and safely detach USB devices.
Important cautions and warnings for the safe and proper use of USB devices with the unit.
Explanation of Bluetooth technology and its application for wireless communication.
List of Bluetooth profiles supported by the unit for various functionalities.
Steps to connect the USB Bluetooth Adapter for initial unit setup.
Guide on how to pair Bluetooth devices with the unit for the first time.
Final steps for successful Bluetooth device pairing and connection confirmation.
Instructions to delete previously registered Bluetooth devices from the unit.
How to connect or disconnect registered Bluetooth devices from the unit.
Options for making calls, accessing call history, and utilizing the phonebook.
How to find and select contacts from the phonebook to initiate calls.
Procedures for entering new phone numbers and deleting existing entries.
How to receive, end, and reject calls, plus configure auto-answer settings.
How to switch between connected phones and handle incoming text messages.
How to play, pause, mute, and skip tracks from a Bluetooth audio device.
Setting repeat and random playback modes for Bluetooth audio sources.
Configuration options for Auto Connect, Auto Answer, Message Notice, MIC, NR/EC, and Ringing Tone.
Settings for phonebook transfer, selection, and viewing device information.
Troubleshooting common Bluetooth connection errors and warning messages.
Explanation of the three control modes: Headunit, iPod, and External.
Step-by-step guide to connect an iPod/iPhone to the unit.
Important cautions and warnings for using iPod/iPhone devices with the unit.
How to stop playback and safely detach the iPod/iPhone device.
How to select tracks and browse content from iPod/iPhone menus.
Setting repeat and random playback modes for iPod/iPhone media.
How to connect external audio devices using the AUX input jack.
How to choose from various preset sound modes for different music genres.
Guide to creating and storing personalized EQ settings for unique sound profiles.
How to navigate menus, return to previous screens, and exit settings.
Configuring display demonstration, clock, EQ, colors, and ring tones.
Adjusting fader, balance, and loudness for optimal audio output.
Setting volume levels, subwoofer LPF, level, and phase for desired sound.
Configuring high pass filter, keypress tone, and amplifier gain settings.
Adjusting dimmer, level meter, scroll, tag display, LCD type, and contrast.
Settings for SSM (Strong-station Sequential Memory) for tuner operation.
Configuring tuner IF band, stereo/mono, and source availability.
Setting iPod control modes and audiobook playback speed.
Selecting preferred colors for buttons and display illumination separately.
Creating custom colors for day and night display/button illumination.
How to set the specific start and end times for display dimming.
Information on playback continuity, menu cancellation, and power-off behavior.
Details on how stations are stored and overwritten during SSM or manual preset.
Cautions for DualDisc playback and general CD/CD-R/CD-RW compatibility.
Specifications and compatibility for playing MP3 and WMA files on discs.
File naming conventions, limits, and supported formats for USB playback.
Information on USB device compatibility, power requirements, and unsupported features.
Cautions for operating Bluetooth devices safely while driving.
Notes on Bluetooth version compatibility and connection conditions.
List of iPod and iPhone models compatible with the unit.
Information on video playback, software updates, charging, and unsupported models.
Notes on song order display and text information handling for iPod/iPhone.
JVC's disclaimer for data loss and trademark information.
How to address moisture condensation on the unit's lens.
Proper methods for handling, cleaning, and storing optical discs.
List of discs that should not be used with the unit and reasons for incompatibility.
Solutions for common problems like no sound, unit not working, and radio reception.
Remedies for issues with disc playback, recognition, and ejection.
Solutions for problems like noise, incorrect playback order, and file format issues.
Remedies for USB connection errors, file not found, and playback interruptions.
Solutions for problems with device detection, pairing, and sound quality.
Remedies for audio playback interruptions, control issues, and voice dial failures.
Solutions for iPod/iPhone not turning on, distorted sound, noise, and file playback errors.
Details on maximum/continuous power output and speaker load impedance.
Specifications for tone control range, frequency response, and signal-to-noise ratio.
Technical details for CD player performance and USB device compatibility.
Specifications for Bluetooth module, power, operating conditions, and physical dimensions.
List of countries where the Bluetooth function is available for use.
Important warnings and precautions to follow before installing the unit.
Step-by-step guide for installing the unit into the vehicle's dashboard.
Diagrams for connecting the microphone and speakers via a JVC amplifier.
Wiring diagrams for power, speakers, antenna, remote, and USB connections.
