16
3
Connections
GB
Connecting a Coaxial Audio Receiver
For better sound quality, you may want to play the audio through your multi-channel audio receiver.
1. Use an audio cable to connect the TV’s SPDIF OUTPUT
socket to an external audio receiver’s audio coaxial
input socket.
2. Plug the connected devices into the mains socket
before switching on the POWER ON/OFF switch
which is located at the front right side under the
frame.
3. Press the
button on the right side panel of the TV
or on the remote control to turn on your TV.
4. Press the
button on the right side panel of the TV
or the INPUT button on the remote control to display
the Source List. Use the
buttons on the remote
control to select the desired input source and then
press the OK button to confirm.
Connecting Headphones
Connect your headphones to the TV’s HEADPHONE
socket.
Before putting on the headphones, turn the volume
down then put the headphones on and slowly increase
the volume until you reach a comfortable listening level.
Rear Right Side View of TV
USB
5V 500mA
HDMI2 HDMI1(ARC) PC IN RF
COMMON INTERFACE (CI)
HEADPHONE PC AUDIO
Earphones Cable
(not included)
Rear Bottom View of TV
SCART
RL SPDIF OUTPUT
Pb PrY
VIDEO
Audio Cable
(not included)
Audio Receiver
The TV’s volume will not be affected. You may
control the audio level via the Audio Receiver.
Long-term exposure to loud music may cause
hearing damage. It is best to avoid extreme
volume when using headphones, especially for
extended periods.
To Next Page
Loading...
Need help?
General
