What to do if my JVC LED TV has no picture and no sound?
If your JVC LED TV has no picture and no sound, ensure the set is switched on and properly connected to the mains power outlet. Select the appropriate input mode. If the issue persists, unplug the unit for 1 minute, then plug it back in.
What to do if my JVC LT-22HG35E LED TV has no colour or picture is black?
If your JVC LED TV has no colour or the picture is black, check that the SCART input is set to Auto.
What to do if my JVC LT-22HG35E LED TV has no reception?
If your JVC LED TV has no reception, ensure you have tuned in the TV stations and press 1 on the remote control. Also, connect the antenna and make sure the TV is ON and not in Standby mode.
Why does my JVC LT-22HG35E switch off with missing antenna input signal?
It is normal for your JVC LED TV to switch off if the antenna signal is missing. The set will automatically change to standby mode 15 minutes after the antenna signal has disappeared.
How to fix blocky image on JVC LED TV?
To fix a blocky image or intermittent image stops on your JVC LED TV: * Check all antenna connections. * Move the antenna away from areas of possible interference. * Try using an antenna booster.
General| Screen Size | 22 inches |
|---|---|
| Display Type | LED |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Contrast Ratio | 1000:1 |
| Brightness | 250 cd/m² |
| Aspect Ratio | 16:9 |
| Refresh Rate | 50 Hz |
| Backlight Type | LED |
| Built-in Tuner | DVB-T/T2/C |
| Resolution | 1920 x 1080 (Full HD) |
Essential safety guidelines for appliance operation and handling.
Instructions to prevent electric shock, focusing on moisture and wiring.
Step-by-step instructions for installing and removing the TV stand.
Guidelines for safely moving the TV and preventing accidents.
Identifies buttons, ports, and indicators on the TV unit.
Lists and describes the functions of buttons on the remote control.
Details the functions of remote control buttons and their corresponding manual pages.
Instructions for correctly installing batteries in the remote control.
Instructions for connecting an antenna for TV reception.
Details all ports on the rear panel for various connections.
Guide through the automatic TV setup and channel tuning.
Configuring and using the parental lock feature for channel access.
Adjusting the picture aspect ratio using the PICTURE SIZE button.
Connecting a PC to the TV for display and audio.
Solutions for issues like no picture, no sound, or reception problems.
To Next Page
