What to do if my JVC LED TV has no picture and no sound?
If your JVC LED TV has no picture and no sound, ensure the set is switched on and properly connected to the mains power outlet. Select the appropriate input mode. If the issue persists, unplug the unit for 1 minute, then plug it back in.
Why does my JVC LT-26HG45E switch off with missing antenna input signal?
It is normal for your JVC LED TV to switch off if the antenna signal is missing. The set will automatically change to standby mode 15 minutes after the antenna signal has disappeared.
General| Screen Size | 26 inches |
|---|---|
| Display Type | LED |
| HD Technology | HD Ready |
| Aspect Ratio | 16:9 |
| HDMI Ports | 2 |
| USB Ports | 1 |
| VGA Input | Yes |
| Built-in Speakers | Yes |
| Standby Power Consumption | 0.5W |
| Resolution | 1366 x 768 pixels |
| Viewing Angle | 178/178 degrees |
| Component Input | Yes |
| Composite Input | Yes |
| Headphone Output | Yes |
To Next Page
