JVC LT-40C880 User Manual

45
7
Other Information
HDMI ARC (Audio Return Channel)
The ARC (Audio Return Channel) function allows you to send audio from your ARC-compliant TV to ARC-compliant audio devices
(e.g. soundbar) through a single HDMI connection.
External speaker e.g. Soundbar
Make sure CEC is enabeled when using
an ARC-compliant device.
HDMI-ARC Connection
To enjoy the ARC function, please ensure your ARC-compliant audio devices are connected by an HDMI cable that support the
ARC function to the HDMI 2(ARC) port of your ARC-compliant TV. When correctly set up, you can use your TV remote control to
adjust the volume output (VOL +/– and MUTE) of the connected audio device.
1. Make sure your TV and ARC-compliant device are disconnected from the
main and switched off.
2. Connect your ARC-compliant device to your TV making sure you use the
HDMI 2 (ARC) socket on the back of the TV. The plug in and switch on at
the mains.
3. Press the MENU button and then press the
buttons to select the
SETTINGS and then press the OK button.
4. Press the buttons to select MORE then press OK.
5. Press the
buttons to select SPEAKERS then press the buttons to
select AMPLIFIER. It may take up to 15 seconds before you hear sound
from your external speaker, this is normal.
You will now be able to use your TV remote control to adjust the volume of
your external speaker and the speaker will also switch into on/standby when
you switch your TV on and off.
HDMI 1
HDMI3 HDMI 2
(ARC)
LAN
ANT.
VGA
Optic.OUT
SPDIF
COMMON INTERFACE
USB
5Vdc
Max. 500mA
USB
5Vdc
Max. 500mA
MODE - / I
- +
R L VIDEO
BACK AV
HDMI3 HDMI 2
(ARC)
LAN
ANT.
VGA
Optic.OUT
SPDIF
R L VIDEO
BACK AV
ARC enabled devices MUST be connected
to the socket marked HDMI 2 (ARC).
JVC 40' LED Smart 4K HDR TV LT-40C880 Manual.indd 45 04/05/2018 10:22

JVC LT-40C880 Specifications

General

Brand	JVC
Model	LT-40C880
Category	Smart TV
Language	English