23
Tuning in Your TV Connected to a Satellite
1. If you selected Satellite you will now have to select your Antenna Type.
You have 3 choices Direct - Single Satellite Cable - DiSEqC Switch. Then press OK.
2. Now select your Satellite either Astra 1 (19.2E) or Hotbird (13.0E). Then press OK.
3. Your TV will now start the automatic channel scan.
4. The Scan statistics screen will now be displayed. This shows the amount of TV
and Radio channels that have been tuned in. Press OK to exit.
Direct
Single Satellite Cable
DiSEqC Switch
Astra 1 (19.2E)
Hotbird (13.0E)
5. The Edit Channel list will appear, press the EXIT button to remove this. Your TV
is now fully tuned in and ready to use.
JVC 43' LED Smart 4K HDR TV LT-43K880 Manual GB GR.indd 23 14/02/2018 14:13
To Next Page
Loading...
Need help?
General
