JVC MX-DN550 - Using the USB; USB Playback Features; LINE IN (AUX IN) Operation; Connecting and Playing via Line In

20
Using the USB
By connecting a USB mass storage device (including
USB ash memory, USB ash players or memory cards)
to this unit, you can enjoy the device’s stored music
through the unit.
1. Insert the USB device’s USB plug into the 5V
500mA socket at the front of unit.
2. Turn SOURCE button on the unit or repeatedly
press USB on the remote control to select the USB
source. The word “USB” will be showed on the
display.
3. Press FOLD+/FOLD– button to select next/
previous album, and play the rst track.
4. Other playback features are the same as if you
were playing an CD.
• The player supports the USB music le format of MP3 only.
• If your USB device is loaded with MP3 les but the display keeps showing ‘NO SONG” on the display,
the format of your USB device might not be compatible with the unit.
• The unit can support USB devices with up to 16 GB of memory.
• The unit may not be compatible with all USB devices, this is not an indication of a problem with the
unit.
LINE IN (AUX IN) Operation
1. While in ON mode, turn SOURCE button on the unit or repeatedly press LINE on the
remote control to select the LINE IN source. The words “LINE IN” will be shown on the
display.
2. Operate your audio device directly for playback features.
3. Turn the – VOLUME + dial on the unit or press the VOL +/– buttons on the remote
control to adjust the volume to your desired level.
MX-DN550_IB_160920_will.indd 20 20/9/2016 11:25 AM