JVC MX-DN550 - Bluetooth Operation; Pairing and Connecting Bluetooth Devices; Bluetooth Playback Controls

21
Bluetooth® Operation
Pairing the unit with a Bluetooth® device to listen to music:
1. Turn the SOURCE button on the unit or directly press the BT button on the remote
control to select the Bluetooth® mode. The word “BT” will be showed on the display and
the Bluetooth® indicator will blink.
2. Activate your Bluetooth® device and select the search mode. “MX-DN550” will appear
on your Bluetooth® device list.
3. Select “MX-DN550” and enter “0000” for the password if necessary. If connect
successful, the Bluetooth® indicator will light up blue and the unit will make a beep
sound.
4. To disconnect the Bluetooth® function,
• Switch to another function on the unit or disable the function from your Bluetooth®
device. The unit will make a beep sound.
• Press and hold UNPAIR/AUTO button on the remote control. The unit will make a
beep sound.
If your Bluetooth® device supports A2DP, play music via your device.
If your Bluetooth® device supports AVRCP, use supplied remote control to control play.
• To pause / resume playback, press .
• To skip to a track, press / or / .
• Turn the – VOLUME + dial on the unit or press the VOL +/– buttons on the remote
control to increase or decrease the volume.
• The operational range between the unit and the device is approximately 10 metres.
• Before connecting a Bluetooth® device to the unit, ensure you know the device’s capabilities.
• Compatibility with all Bluetooth® devices is not guaranteed.
• Any obstacle between the device and the unit can reduce operational range.
• Keep this player away from other electronic devices that may cause interference.
• If no other Bluetooth® devices pairs with this unit within 2 minutes, the unit will recover to its previous
connection.
• The player will also be disconnected when your device is moved beyond the operational range.
MX-DN550_IB_160920_will.indd 21 20/9/2016 11:25 AM