9
2. Insert the AAA battery with correct polarity (+/-) as
indicated.
Preparation
Battery Replacement for the Remote Control
1. Press and hold the button at the back of the remote
control to open the back cover.
Handling the Battery
• Improper or incorrect use of batteries may cause corrosion or battery leakage, which could cause re,
personal injury or damage to property.
• Only use the battery type indicated in this manual.
• Do not install new batteries with used ones and do not mix dierent types of batteries.
• Do not dispose of used batteries as domestic waste. Dispose of them in accordance with local
regulations.
• Do not expose the batteries to excessive heat such as sunshine, re or the like.
Handling the Remote Control
• Do not drop the remote control.
• Do not allow anything to impact the remote control.
• Do not spill water or any liquid on the remote control.
• Do not place the remote control on a wet object.
• Do not place the remote control under direct sunlight or near sources of excessive heat.
• Remove the battery from the remote control when not in use for a long period of time, as corrosion or
battery leakage may occur and result in physical injury, and / or property damage, and / or re.
• When the battery is exhausted, the remote control will not function.
3. Replace the back cover.
Ensure the back cover is in right position. Incorrect
installation will damage the rib of the remote control.
MX-DN550_IB_160920_will.indd 9 20/9/2016 11:25 AM
To Next Page
Loading...
Need help?
General
